-
Year: 2014
Make and Model: BMW G650GS SERT?O US
August 20, 2015 | Recall Campaign No. 15V-537 Status:
ENGINE CONTROL SOFTWARE Remedy Available
Last updated:September 17, 2015
DESCRIPTION OF PROBLEM
This recall involves the engine control software which regulates the idle speed, as well as an improperly tightened intake manifold hose clamp. If the clutch lever is engaged, the throttle is closed with the engine operating at idle speed and an intake manifold hose clamp is loose, the engine may stall. The reported engine stalling typically occurs shortly before the motorcycle is brought to a stop.
SAFETY RISK
Engine stalling could increase the risk of a crash.
DESCRIPTION OF REPAIR
Your BMW Motorcycle dealer will update the engine control software and tighten an intake manifold hose clamp.
For additional information or assistance, please contact Customer Relations and Service at 1-800-525-7417 or via Email at CustomerRelations@bmwusa.com
Richard - Current bikes: 2016 BMW R1200RS, 2018 16.6 kWh Zero S, 2011 Royal Enfield Bullet 500 Classic, 2009 BMW F650GS, 2020 KTM 390 Duke, 2002 Yamaha FZ1 (FZS1000N) and a 1978 Honda Kick 'N Go Senior.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Bookmarks